Share minimum, normal and maximum flow, liquid conditions and the required signal. A series-wide range is not the usable span of one ordered meter.
For a low-flow inquiry, provide the minimum, normal and maximum flow with units. Also state whether flow is continuous or intermittent, the liquid and its operating temperature, viscosity information available, pressure, connection and output requirement.
FL500 has separate range codes from L2 through L32. For example, L2 is listed as 5~300 mL/min and L6 as 0.15~8 L/min. The series envelope of 5 mL/min to 330 L/min combines different variants; it is not the measurement span of one meter.
Define the sample test
Before ordering one evaluation unit, agree the range code and configuration, the test liquid and conditions, reference method, acceptance points and documentation required. Where the catalog does not state an accuracy condition for your case, request it rather than inferring it from another configuration.
A successful test under one set of conditions does not automatically establish performance over every catalog option. Record the actual conditions and the selected unit's identification for purchasing and engineering review.
Discuss your application with CASCED INC.
Share the operating conditions and integration requirements with our team.
Contact Us